HP Z220 CMT Quickspecs page 17

QuickSpecs
System Technical Specifications
Rated Line Frequency
Operating Line Frequency
Range
Rated Input Current
Heat Dissipation
Power Supply Fan
ENERGY STAR® qualified
(Config Dependent)
80 PLUS Compliant
CECP Compliant @ 220V
(<4W in S3 - Suspend to
RAM)
FEMP Standby Power
Compliant
Power consumption in
sleep mode (as defined by
ENERGY STAR) - Suspend
to RAM (S3)
Built-in Self Test (BIST)
LED
Surge Tolerant Full
Ranging Power Supply
(withstands power surges
up to 2000V)
Hood Lock Header
ErP Lot 6- Tier 1
Compliance @ 230V (<1W
in S5- Power Off)
ErP Lot 6- Tier 2
Compliance @ 230V
(<0.5W in S5- Power Off)
Declared Noise Emissions
(Entry-level and High-end
configurations)
System Configuration
Example Configuration #1
50-60 Hz
47-66 Hz
5.5A @ 100-240V
Typical: 910 btu/hr (229 kg-cal/hr)
Maximum: 1569 btu/hr (395 kg-cal/hr)
92x25 mm variable speed
Yes
Yes, 90% Efficient
For the PSU Efficiency Report for the power supply, please go to this link:
http://www.plugloadsolutions.com/psu_reports/HEWLETT-PACKARD_619397-
001_ECOS%202277%201_400W_Report.pdf
Yes, Configuration dependent
Yes, with Wake-on-LAN disabled: <2W in S5- Power Off
<4W
Yes
Yes
Yes
Yes
Yes
To be advised later with the Intel Core i3 processor introduction.
DA - 14286 Worldwide — Version 20 — November 21, 2013
HP Z220 CMT Workstation
Page 17