Table of Contents
Advertisement
Dial the number and then press the TALK or SPKR button on handset.
-OR-
Press the
SPKR button on handset.
-OR-
Press and hold the number key to get the corresponding speed dialing number.
. When finished, press the END/cancel button on the handset to hang up.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press
the DELETE/flash button until all of the digits are erased.
NOTE: To set the speed dialing number, refer to section "Phone
Book -> Adding the Speed Dialing Number".
Cellular Calls
1. In standby mode, dial the desired number, press Cell (SKR) button.
NOTE: If more than one bluetooth cell phone device is connected
use the
. Press Select (SKL) button to confirm.
4. Press the END/cancel button when finished.
Answering a Call
Check the display to see who is calling.
Landline Calls
1. Pick up the handset, and press the TALK or SPKR button on the handset.
. When finished, press the END/cancel button on the handset, or place the handset
in the cradle.
Cellular Calls
1. Pick up the handset, and press the Cell (SKR) button on the handset.
. When finished, press the END/cancel button on the handset, or place the handset
it the cradle.
button to select the desired record, then press the TALK or
or
button to select the desired device.
or
5
Advertisement
Table of Contents
