Using The On-Screen Display (Osd) - Yamaha DVD-S663 Owner's Manual

1
Load one of the last ten discs.
"LOADING" appears on the TV
screen.
2 Press 3 / 8 while "LOADING" is
displayed on the TV screen.
"RESUME PLAY" appears on the TV
screen and the disc is played back from
the last point.
To cancel the resume mode
When playback is stopped, press 7 again.
Note
For DVD VR format, resume playback is not
available.

Using the on-screen display (OSD)

The OSD menu shows disc playback
information (e.g., the title or chapter number,
elapsed playing time or audio/subtitle
language). A number of operations are
possible without interrupting disc playback.
1
During playback, press ON SCREEN.
A list of available disc information
appears on the TV screen.
DVD
MENU
TITLE 02/14
CHAPTER 02/14
AUDIO 5.1CH
SUBTITLE ENG
BITRATE 16
VCD/SVCD
MENU
TRACK 02/14
DISC TIME 0:49:17
TRACK TIME 0:03:43
REPEAT OFF
BITRATE 16
TITLE ELAPSED 0:02:25
TOTAL ELAPSED 0:02:25
Playback Operation
2 Press 5/a to scroll the information, and
then press ENTER to access the selected
item.
3
Use the numeric buttons (0-9) to input
the number/time or press 5/a to make a
selection, and then press ENTER.
Playback changes to the selected time/
title/chapter/track.
Changing the Title/Chapter/Track
(DVD/VCD)
1
Press 5/a to select [TITLE],
[CHAPTER] (DVD), or [TRACK] (VCD).
2
Press ENTER.
3
Select a title, chapter, or track number
using the numeric buttons (0-9).
Time search (DVD/VCD)
1
Press 5/a to select [TT TIME] /
[CH TIME] (DVD) or [DISC TIME] /
[TRACK TIME] (VCD).
• [TT TIME] refers to the total time of
the current title, and [CH TIME] refers
to the total time of the current chapter.
2
Press ENTER.
3
Enter hours, minutes and seconds from left
to right using the numeric buttons (0-9)
(e.g. 0:34:27).
Changing the Audio/Subtitle/Angle
(DVD)
You can change [AUDIO], [SUBTITLE], or
[ANGLE] if these functions are available on
the disc you are playing.
1
Press 5/a to select [AUDIO],
[SUBTITLE], or [ANGLE].
2
Press ENTER.
19
En