Attached Devices - NETGEAR N300 User Manual

4. Depending on the authentication type, generate the key automatically or enter it manually:
• If the authentication type is Automatic:
a. In the Passphrase field, enter a passphrase:
b. Click the Generate button.
For 64-bit WEP, four different WEP keys are generated. For 128-bit WEP, only
one WEP key is generated, and the four key fields are populated with the same
WEP key.
• If the authentication type is Shared Key:
a. Specify the active key by selecting the Key 1, Key 2, Key 3, or Key 4 radio
button.
Only one key can be the active key.
b. Enter the value for the key manually:
- For 64-bit WEP, enter 10 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
- For 128-bit WEP, enter 26 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
5. Click the Apply button.

Attached Devices


To view all computers and devices, including intruders (unauthorized users) that are
currently connected to your wired and wireless networks:
Select Basic > Attached Devices.
The Attached Devices screen displays:
Wired devices are connected to the router through Ethernet cables. Wireless devices have
joined the wireless network.
N300 Wireless Router WNR2000v4
genie Basic Settings
32