Advanced Wireless Settings - NETGEAR N900 User Manual

Advanced Wireless Settings

1. Select Advanced > Advanced Setup > Wireless Settings:
2. Configure the following settings:
• Enable Wireless Router Radio. To completely turn off the wireless portion of the
wireless router, clear this check box. Select this check box again to enable the
wireless portion of the router. When the wireless radio is disabled, other members of
your household can use the router by connecting their computers to the router with an
Ethernet cable.
Note: The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode
options are reserved for wireless testing and advanced configuration only. Do
not change these settings.
• Turn off wireless signal by schedule. Turn off the wireless signal from your router at
times when you do not need a wireless connection. For example, you could turn it off
for the weekend if you leave town.
• WPS Settings.Add WPS devices to your network.
• AP Mode. You can make the router function as an access point.
• Wireless Card Access List. Click the Set Up Access List button to display the
Wireless Card Access List screen. On this screen, you can restrict access to your
network to specific devices based on their MAC address.
3. Click Apply to save your settings.
N900 Wireless Dual Band Gigabit Router R4500
Advanced Settings
84
Scroll to view
more settings