Control Center Configuration; Usb Printer - NETGEAR N900 User Manual

Control Center Configuration

Select Tools > Configuration:
Automatically execute when logging on Windows. Enable this utility to start automatically
when you are logged in to Windows.
Timeout. Specify the time-out value for holding the USB resource when it is not in use.
Language. Select the display language for this utility.

USB Printer

The first time you use a printer, you need to click Connect in the Netgear USB Control
Center screen. You might be asked to install the driver for this printer. After the driver is
installed, the printer status changes to Available.
Note: Some USB printers (for example, HP and Lexmark printers) request
that you do not connect the USB cable until you are prompted by the
their installation software.
If the USB printer is detected and connected automatically, you need to disconnect the printer
and wait for the prompt asking you to click Connect.
N900 Wireless Dual Band Gigabit Router R4500
ReadySHARE Printer
63