Ipv6 - NETGEAR N900 User Manual

IPv6

You can use this feature to set up an IPv6 Internet connection type if NETGEAR genie does
not detect it automatically.
To set up an IPv6 Internet connection type:

1. Select Advanced > Advanced Setup > IPv6:
2. Select the IPv6 connection type from the list.
Your Internet service provider (ISP) can provide this information.
• If your ISP did not provide details, you can select IPv6 Tunnel.
• If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
• If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, then
select IPv6 auto config.
3. Click Apply so save your settings.
N900 Wireless Dual Band Gigabit Router R4500
Advanced Settings
104