[Type some text]
Ventilation
The memory card slots and other openings allow the frame to be ventilated.
In order to ensure your frame works at its best and to prevent overheating, these
openings should not be obstructed or covered.
Keep the frame a sufficient distance from the wall to aid ventilation.
Do not stand the digital photo frame on a bed or sofa to avoid overheating.
Warning!
Never remove the plastic cover located at the back of the frame. The digital photo
frame includes electrical circuits and you risk injury if you touch them.
Never try and repair your digital frame yourself.
The guarantee does not cover damage caused if you (or any unauthorised
person) have tried to repair the frame.
If the frame gives off smoke or an unusual smell, or makes a noise, switch it off
and unplug it immediately. Contact your shop.
If you do not intend using the digital frame for some while, make sure you unplug
the power supply cable.
The guarantee covers the digital photo frame and not its accessories. By
accessories we mean:
The power supply unit.
The remote control (depending on the model).
Digiframe
Digital photo frame
Non binding document, subject to modification in the event of
misprint(s) – MKG0308
57
Need help?
Do you have a question about the Digiframe 7002 and is the answer not in the manual?
Questions and answers