F.a.q - Telefunken Digiframe 7002 User Manual

[Type some text]
VI.

F.A.Q.

Q: I inserted a memory card into my DIGIFRAME but the frame cannot read
it. What should I do?
A: Make sure that the card format is compatible with the frame. Then make sure
that the card is properly inserted into the appropriate slot. Finally, switch your
DIGIFRAME off, then on again, so that the reader can recognize the card.
Q: Why are some photos loaded faster than others?
A: High resolution photos are slower to load. In order to reduce loading time, you
should adjust image resolution to match that of the frame, i.e. 480 x 234 pixels.
You can also use lower resolution photos.
Q: Why can't I display a Black and White photo?
A: DIGIFRAME can display black and white images as long as they are in RGB
mode and not greyscale. To keep black and white images in RGB, you just need
to desaturate the colours using editing software
Q: Why do my images load more slowly with certain cards?
A:There are various card technologies. Some are slower than others when it
comes to reading them. If you load them into internal memory, reading them will
be quicker.
Digiframe
Digital photo frame
Non binding document, subject to modification in the event of
misprint(s) – MKG0308
55