Image Dimension - Telefunken Digicadre 7001 User Manual

When the frame is in slide-show mode and photos are being displayed, press the
buttons, highlight the "Multiple display" line. Press
press
The height-width ratio of the 7" DIGICADRE is 16:9. This means that images with another
ratio (4:3 for photos output from compact digital cameras, or 3:2 for the majority of digital
reflex cameras), are not entirely displayed. The top and bottom of the image will be
trimmed. Thanks to the image dimension menu, you will be able to adapt the screen
display to the size of your photos,
-Original: your photo will be fully displayed, but there will be black lines on the sides.
-Optimal: The image will be cropped to fit it to full screen (but note that the top and bottom
will be trimmed)
Warning: Do not confuse image resizing with zooming into images. Resizing is actually
applied to all images, while zooming only applies to the image currently on the screen.
Fig.8
Fig.7
With the frame
button to leave the slide show, then press second time for 3 seconds.. Using the
buttons, highlight the option that you are interested in ("None" or "Activate"), then
. Next press to exit the menu, followed by

3. Image dimension

to display the options. Using the
to launch the slide-show again.
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
18