Switching On; Choosing The Image Source - Telefunken Digicadre 7001 User Manual

seconds
Fig.3
When the frame is in slide-show mode and photos are being displayed, point the remote
control (fig.3) at the frame and then press EXIT twice. The screen on the left appears
(fig.4). Select the desired source (memory card or internal memory) with the left and right
arrows of the remote control (fig 3), then press the remote control's "ENTER" button to
confirm your choice. Press "ENTER" again to launch the slide show that you have
chosen.
Fig.4

3. Switching on

With the remote control
Press the ON/OFF button at the back of the frame : the slide-show begins after a few
4.

Choosing the image source

With the frame
With the remote control
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
13