Table of Contents
Advertisement
Press the Mute button again to
restore the sound. The symbol
will disappear.
Pressing Volume up buttons
will also restore the sound.
But pressing the Volume down
button will decrease the volume
without restoring the sound.
PP
Personal preference. Press the
PP button to revert to the
default settings for the TV.
(See TV setup).
Swap
Select the program you would
like to recall by pressing SWAP
button. Selected program
number will appear on the upper
8
left side of the screen. While
watching any program, you
can recall the selected one by
pressing SWAP button again.
If you press swap button again you
can recall the last program you
watched. You can cancel SWAP
function by pressing MENU button.
PR 11
PR 01
AV
Your TV has 3 scarts so every time
AV
you press your AV button, your input
will change as follows:
1 AV1 when using SCART socket 1
(RGB support) (Option).
2 AV2 when using SCART socket 2.
3 AV3 when using SCART socket 3
(RGB support) (Optional) .
4 AV3-S for S-Video equipment to scart 3
(S-VHS/Scart adaptor is needed).
5 AV4 when using the RCA sockets
of the TV.
6 AV4-S when using the S-video socket.
Press the AV button again to
AV
return to TV.
a- Selected country's channels with teletext
and channel names.
b- Selected country's channels with teletext
and without channel names.
c- Selected country's channels without
teletext.
d- Foreign channels with teletext and channel
names.
PR 12
PR 13...
PR 01
Tuning the television
There are two ways of tuning your television:
Manual, where you control the tuning process
or
Autoprogram where the television does it all
automatically.
Your TV will sort all the channels with the
ATS. Sorting will be performed in the
following order:
Please Note
If the TV is set to a channel with no signal the
TV will return to standby in 5 minutes.
The last minute remaining is displayed on
the screen.
Automatic tuning (Autoprogram)
There are two ways to access the SETUP
menu:
Press the blue Setup button.
or
Press the Menu button and use the
Program down button to select
SETUP. Press theOK button to
enter the SETUP menu.
OK/Z
MAIN MENU
SETUP
Advertisement
Table of Contents
