Sound Features - Telefunken TTV32PF10 Operator's Manual

Headphone
You can set up the volume, balance, bass
treble and sound type (stereo or mono)
of the headphone output.
Use OK button to enter the HEADPHONE
menu.
You can also listen to the PIP window by
choosing PIP from the SOURCE line. (Except
Secam L TV sets).
Use Program down button to go to
SOURCE and press Volume Up or down
button to select PIP.
HEADPHONE
VOLUME
BALANCE
BASS
TREBLE
MONO
SOUND TYPE
MAIN SCREEN
SOURCE
STORE
Please Note
1. PIP listening through the headphone
jack is not available in Secam LL TV sets.
2. If the mainscreen is AV input source,
you can not listen to any other input
sources from the headphone jack. In such
cases headphone source can not be chosen
as PIP.
To save your settings, select STORE
and press theOK button. STORED
OK/Z
will be displayed. Press theMenu
button to go back to the previous
menu.

Sound Features

You can set up the Sound Mode, AVL Mode
Dynamic Bass, Subwoofer (Optional) and
Equalizer from Sound Features menu.
To access the Sound Features menu press
the Red button on the remote control and
press Volume down button to select Sound
Features.
Press OK to enter the Sound Features.
SOUND FEATURES
SOUND MODE
SPATIAL
AVL ON
ON
DYNAMIC BASS
EQUALIZER
Sound mode
You can select NORMAL, SPATIAL or
DOLBY VIRTUAL (optional) using the
Volume up/down buttons.
SPATIAL sound is an 'expanded stereo'. It
gives the impression that the two speakers in
the TV are further apart than they really are.
"Virtual Dolby Surround sound is based on
Dolby Pro Logic decoding for the
reproduction of Left, Right, Centre and
Surround channels using two loudspeakers.
Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic" and the double-D
symbol are trademarks of Dolby
Laboratories.
Please Note
To get the surround effects in " Dolby Virtual"
mode, you must apply a Dolby Pro Logic
coded input to the TV. You can't adjust the
AVL and EQUALIZER in DOLBY VIRTUAL
mode.
AVL
TV transmitters have different sound levels.
AVL (automatic volume limiting) maintains
the same sound level as you switch from
program to program.
To apply this press Volume up or down
button and select ON for AVL in Sound
Features menu.
Dynamic Bass
To give depth effect to bass sound you can
select Dynamic Bass as ON.
To supply this press Volume up or down
button and select ON for Dynamic Bass in
Sound Features menu.
Note: If you select Dynamic Bass as ON
Subwoofer will also be automatically ON.
(If the set has subwoofer option).
13