Other Features; Pip - Telefunken TTV32PF10 Operator's Manual

OTHER FEATURES

Picture freeze
FREEZE
When you press "FREEZE" key on
your remote control, the picture on
the screen becomes fixed. To get
out of the position, press the same
key again.
Picture scan
SCAN SCAN
You can scan the programs starting
from the current program you have
OK/Z
been watching, on the screen within
twelve frames. Press "SCAN" key
on your command for this.
To view the desired one from these
programs, press "OK" during
scanning. The program you chose
will appear on the screen. To exit,
18
press "SCAN" key.
Blank programs will not be
scanned.
Zoom Function
OK/Z
Pressing OK/Z button zooms in to
the picture. Zoom function is
performed towards the center of
the picture.
There are 3 steps Zoom, each time
you press the OK/Z button.
ZOOM1, ZOOM2, ZOOM3.
You can also scroll on the picture
by pressing Program up or down
and Volume up and down buttons.
PIP OPERATION (OPTIONAL)
2 Tuner PIP function allows you to to
watch 2 programs or other inputs like
DVD, VCR or satellite receiver at the
same time through its PIP window.
It includes lots of functions like, SWAP,
SIZE, POSITION, ZAPP and DOUBLE
WINDOW.
On and off
P 100
Press the PIP button to switch on

PIP

the PIP picture. Press again to
switch it off.
Input mode selection for PIP
MIX
picture
INPUT
Press the INPUT button to select
the AV input signal for the PIP
picture.
Each time this button is pressed,
each input signal for the PIP
picture is displayed as shown
below.
Programme number AV1
Optional
AV4-S AV4 AV3-S AV3
Swapping between main and
PIP pictures
Press the SWAP button to
exchange the main and PIP
pictures.
ZAPP: Program selection for
PIP picture
Press the P-/P+ buttons The
selected sub-program number is
displayed just below the sub
picture.
PiP User Hints
1- It is not possible to watch AV2, AV2S at
the same time on main screen and PIP screen.
PIP picture will automatically switch to AV3
mode and it is also valid for AV3 and AV3S.
2- In NTSC mode from scart, only one SCAN
MODE is available and double window (PAP)
can not be displayed.
3- During tuning scan, all programs that are
found after Auto-Programming will be
displayed.
4- PIP picture in AV2S and AV3S inputs are
only black and white.
AV2