Table of Contents
Advertisement
6.
It is a good idea to secure the wir-
ing from vibration as much as pos-
sible. Do not have the weight of the
cables hanging on the terminals.
Fitting the loudspeaker
1.
Press the loudspeaker into the
sheetrock opening, and screw
in the six clamp screws. As the
screws turn clockwise, the clamps
rotates out and presses onto the
back of the sheetrock to hold the
loudspeaker firmly in place.
Tighten the clamps (the sheetrock is not
shown for clarity)
User's Manual
Rear view showing the clamps engaged
and the wiring in place
15
Advertisement
Table of Contents
