Chain Dialing Fromm; Umber; Emory; Nserting Aause In The Equence - GE 27944 User Manual

4. Press SELECT/TRANSFER to confirm the selection. ENTER LOCATION shows in the display.
5. Use the touch-tone pad to enter the memory location number (01-10).
6. Press the SELECT/TRANSFER button to confirm.The number dials automatically.
- OR -
1. Make sure the phone is OFF (not in talk mode).
2. Press the MENU button to enter the main menu.
3. Use the CID/VOL (+ or -) button to scroll to PHONE BOOK.
4. Press the SELECT/TRANSFER button to access the phone book.
5. Use the CID/VOL (+ or -) button to select the desired number.
6. Press theTALK/call back or SPEAKER buttons.The number dials automatically.
C D
HAIN IALING FROM
This unit allows you to perform cascade dialing with several numbers stored in the memory.
For example; to perform a long distance phone call, store the long distance call access
number, authorization code, and the desired telephone number in memory locations 7, 8 and 9
respectively.
1. Make sure the phone is ON (in talk mode) by pressing theTALK/call back or SPEAKER button.
2. Press the MENU button to access the option menu.
3. Repeat steps 1 through 4 in Dialing a Number from Memory, and then press the first
memory location, i.e. 07.
4. Press SELECT/TRANSFER button to confirm.
5. When you hear the access tone, repeat steps 1 through 4 in Dialing a Number from Memory,
and then press the second memory location, i.e. 08.
6. Press SELECT/TRANSFER button to confirm.
7. At the next access tone, repeat steps 1 through 4 in Dialing a Number from Memory, and
then press the third memory location, i.e. 09.
8. Press SELECT/TRANSFER button to confirm.
I P
NSERTING A AUSE IN THE
Press the PAUSE# button once to insert a delay in the dialing sequence of a stored telephone
number. A pause is needed to wait for a dial tone (for example after you dial 9 for an outside
line, or to wait for a computer access tone). PAUSE shows on the display as a P . Each pause
counts as 1 digit in the dialing sequence. If you need a longer pause, press the PAUSE#
button twice.
C
ONNECTING THE
To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset.
Snap into place.
26
M

EMORY

D
IALING
B C
ELT LIP
S
EQUENCE