HP EliteOne 800 G1 Specification page 27

QuickSpecs
Technical Specifications – Hard Disk and Solid State Storage
HP 128 GB Solid State Drive
Unformatted Capacity
Architecture
Interface
Dimensions (W x H x D)
Weight
Bandwidth Performance
Latency
Power
Useful Drive Life
Environmental
(all conditions, non-condensing)
Regulations
* For solid state disk drives, GB means 1 billion bytes. 128GB is the unformatted capacity of this drive before a portion of the drive is
reserved for flash management features. Actual capacity will vary by content
** The product achieves a mean time between failure (MTBF) based on population statistics not relevant to individual units.
HP 160 GB Solid State Drive
Unformatted Capacity
Architecture
Interface
Dimensions (W x H x D)
Weight
Bandwidth Performance
Latency
128 GB*
Multi Level Cell (MLC) NAND
SATA 6 GB/sec
2.75 x 0.276 x 3.96 in (6.985 x 0.7 x 10.05 cm)
0.16 lb (73 g)
Sustained Sequential Read: Up to 450 MB/s
Sustained Sequential Write: Up to 260 MB/s
Random Read: up to 46K IOPs
Random Write: up to 56K IOPs
Write: 55ms (TYP)
DC power requirement: Min 4.5 V; Max 5.5 V
Total power consumption: 160 mW (Active) ; <85 mW; (Idle)
1.2 million device hours**
Operating Temperature: 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
Maximum Wet Bulb
Temperature (operating):
Shock: 1,500 G/1.0 msec
UL, CSA, EN 60950-2000, CISPR Pub 22 Class B, CNS 13438, AS/NZS
CISPR 22:2002 Class B, Korea KCC, CE Mark
160 GB*
Multi Level Cell (MLC) NAND
SATA 3 GB/sec
2.74 x 0.37 x 4 in (6.98 x 0.95 x 10.2 cm)
0.18 lb (80 g)
Sustained Sequential Read: Up to 250 MB/s
Sustained Sequential Write: Up to 70 MB/s
Random Read: up to 35K IOPs
Random Write: up to 6.6K IOPs
Write: 85 ms
DA - 14652 North America — Version 13 — November 11, 2013
HP EliteOne 800 G1 All-in-One Business PC
Read: 55ms (TYP)
84° F (29° C)
Read: 65 ms
Page 27