Material Usage - HP ProBook 440 Specification

QuickSpecs
Technical Specifications
ALL MODELS

MATERIAL USAGE

This product does not contain any of the following substances in excess of regulatory limits (for reference of these limits please refer
to the HP General Specification of the Environment
(http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/gen_specifications.html):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants – may not be used as flame retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Internal:
The Others/Others packing material is made from 80 % recycled
content
The PAPER/Corrugated & misc packing material is made from 80 %
recycled content
The PLASTIC/Polyethylene low density packing materials contains at
least 65% recycled content
The PLASTIC/Pet packing materials contains at least 65% recycled
content
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
DA - 14588 Worldwide — Version 6 — September 3, 2013
HP ProBook 440 Notebook PC
HP ProBook 450 Notebook PC
HP ProBook 470 Notebook PC
PLASTIC/Polyethylene low density 26 g
PLASTIC/EPE-Expanded Polyethylene 55 g
PLASTIC/PET 3 g
Page 47