GE 27700 User Manual page 18

Problem
Cannot hear phone
You experience
noise, or fading in
and out
Unit beeps
Cannot hear the
PAGE/FIND tone
Battery will not hold a
charge
Memory Dialing does not
work
18
Solution
• Press VOLUME up button on the handset.
• Charge battery.
• Is handset out of range? Move closer to the base.
• Does the base need to be relocated?
• Make sure base is not plugged into an outlet with another
household appliance.
• You may be receiving an out-of-range alert, move closer to
the base.
• Place handset in base for 10 seconds to reset the
phone. The IN USE indicator blinks and then goes out after
the unit resets.
• Put handset in base for 12 hours to recharge battery.
• Clean charging contacts on handset and base with a soft
cloth or an eraser.
• See solutions for "No dial tone."
• Replace battery.
• Set the RINGER to ON.
• Make sure the battery is properly charged (12 hours).
• Make sure battery contacts on both the handset and the base
are making contact and are clean; free of dirt or lint.
• When the handset is placed in the base, make sure that the
base CHARGE/PAGE indicator is on.
• Memory location must be 2 digits (i.e, 01,02, etc.).
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure TONE/PULSE switch is correctly set.