Table of Contents
Advertisement
14. Identify and orient the Front Upright Cover (58)
as shown.
Attach the Front Upright Cover (58) to the
Upright (2) with two M4 x 16mm Screws (77).
15. Identify the Right Pedal (21), which is marked
with an "R."
Using an adjustable wrench, firmly tighten the
Right Pedal (21) clockwise into the Right Crank
Arm (23).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the Left Crank Arm (not
shown).
If necessary, press the right strap onto the
post on the Right Pedal (21). To loosen the
strap, press the indicated tab and pull the strap
upward. To tighten the strap, simply pull the end
of the strap downward. Adjust the strap on the
Left Pedal (not shown) in the same way.
16. Plug the Power Adapter (51) into the receptacle
on the frame of the exercise bike.
To plug the Power Adapter (51) into an outlet,
see HOW TO PLUG IN THE POWER ADAPTER
on page 14.
17. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
14
15
16
12
77
58
2
Strap
Post
23
21
Tab
51
Advertisement
Table of Contents
