Input Search - Panasonic TH-80LF50W Operating Instructions Manual

Item
Whether to show/hide No activity power off Precautions at the time of power ON is set.
Power On Message On: The warning precautions are shown at the time of power ON.
(No activity power off) Off: The warning precautions are not shown at the time of power ON.
Note: This setting is enabled only if "No activity power off" is "Enable" (see page 33).
Set the functions that operates when
Signal: The "Signal" menu is displayed.
Screensaver: The "Screensaver" menu is displayed.
ECO menu: The "ECO Mode settings" menu is displayed.
Set up TIMER: The "Set up TIMER" menu is displayed.
Note:
Factory settings are as follows.
FUNCTION1 button: Signal
FUNCTION2 button: Screensaver
Function button assign 1
Function button assign 2
Use the FUNCTION button
Normalisation
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or
"Remote ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
-
/
The "Shipping" menu is displayed and the lock is released when it disappears.

Input Search

When a signal is not detected, another input with a signal is automatically selected.
Options
1/3
Input Search
On screen display On
Initial input Off
Input Search
Off: When there is no signal, the input is not switched automatically.
All Inputs: Searches all inputs and switches to an input with a signal.
Priority: Searches "Primary Input" and "Secondary Input" in order and switches to an input with a signal.
Searching...
"Searching..." is displayed during the input search.
Primary Input, Secondary Input
Set the input to search when "Priority" is selected.
(NONE) SLOT INPUT*
* "SLOT INPUT" is displayed when an optional Terminal Board is installed.
When a Terminal Board with dual input terminals is installed, "SLOT INPUT A" and "SLOT INPUT B" are displayed.
Note:
• This menu is available only when "Input lock" is "Off". (see page 45)
The menu screen is displayed. (Example: Signal)
Signal
3D Y/C Filter
Colour system Auto
Cinema reality
Noise reduction
Press the FUNCTION button to exit from the menu.
button on the remote control and hold for more than 5 seconds.
Press ACTION ( ) button
VIDEO Component/RGB
Options Adjustments
Adjustments
is pressed.
[ AV ]
On
Off
Off
Input Search
Input Search Off
Primary Input
Secondary Input
PC DVI HDMI
select
1
adjust
2
47