Connections
AC cord connection and fi xing, cable fi xing
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at four positions, please purchase it separately.
TH-70LF50W
Attach the clamper
1
hole
Insert the clamper
in a hole.
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
TH-80LF50W
To remove from the unit:
2
snaps
Keep pushing
both side
snaps
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
Bundle the cables
To loosen:
Set the
knob
tip in the
hooks
hooks
Keep
pushing
the knob
9