Advertisement
SCOTT SMART
CABLE ROUTING
The direct and straight cable system on all our full
suspension models allows Smart Cable Routing which
is very resistant against water and dirt.
To change the cables simply unscrew and open the
three cable brackets on the downtube.
On the left side of the downtube you will find the
cable housings of the rear brake and on the right side
for the rear derailleur. [3]
3
Smart Cable Routing
04
MECHANICS HINT
The outer housing of the cables can also be fixed on
the bottle cage with cable fixers, the two brackets
below the cage are not needed anymore. [4]
4
Mechanics hint
FRONT FORK SET UP
For the set up of the front fork please use the fork
specific manual attached to the bike .
PIVOT MAINTENANCE
The pivot and bearings on SCOTT Reflex FX are
extremely easy to maintain.
An external treatment with a grease spray after
every bike wash is all you have to do. We do not
recommend heavy grease sprays since these will
leave a film on the parts which is difficult to remove.
We recommend the same for the chain also.
If you have to change the bearings you can order
them included in a service kit at your local SCOTT
dealer with parts number 15.5.860.503.0.000.
In case of a change of the bearings or of the rear
swingarm you should contact your local SCOTT
dealer therefore you need special tools for disas-
sembly and assembly.
05
Hide quick links:
Advertisement
