Order Guide - Panasonic EX-F70 SERIES Ordering Manual

EX-F60 SERIES
PFA enclosure gives excellent chemical resistance
The sensor enclosure and the cable
sheath are made from PFA which is
highly resistant to chemicals. Accurate
sensing is achieved even if there are
leaks of chemicals such as sulfuric
acid, hydrochloric acid or ammonia.
Easy installation & reset
The simplified shape makes it easy to clean up after liquid
leaks, simply by wiping off the liquid, and no parts need to
be replaced.
EX-FC1
Wire-saving unit made especially for connecting leak detection sensors!
Saves wiring! Now connects up to 8 leak detection sensors
EX-FC1 is a simple wire-saving unit for exclusive use with
EX-F71/F72, EX-F61/F62 leak detection sensors.
(It can be used with general sensors as well.)
EX-FC1 integrates the outputs from up to 8 leak detection
sensors into a single OR output, so significant wiring and
space savings are achieved.
* Even with only one leak detection sensor connected, an
OFF signal is output if the sensor detects liquid leakage,
or if the unit has been installed incorrectly.

ORDER GUIDE

Leak detection sensors
Type Appearance
SUS mounting
bracket type
PVC mounting
bracket type
PFA mounting
bracket type
PVC mounting
bracket type
Notes: 1) Highly viscous liquid may not be detected stably.
2) Fluorinert is the world wide trademark of 3M.
TM
3) The agents mentioned above are examples.
For details, please contact our office.
5 m 16.404 ft cable length type
5 m 16.404 ft cable length type (standard: 2 m
available.
When ordering this type, suffix "-C5" to the model No.
(e.g.) 5 m 16.404 ft cable length type of EX-F71-PN is "EX-F71-PN-C5".
Leak Detection Sensor
Compact, space-saving
Even with its built-in
PFA coating
amplifier, the size is
compact at W26 × H19 ×
PFA case
D9 mm
× D0.354
be used even in narrow
spaces.
Slim & compact
Space savings are significant, as the ultra-thin & compact
EX-FC1 has main unit body dimensions of only W20 × H80
× D52 mm
Connects easily with one-touch connector
Connections are made by simply
inserting the leak detection sensor
cable leads into the snap male
connector SL-CP1, then push until
the connector snap-locks! This
saves the time and the trouble of
stripping the insulation from each
lead before attaching to terminals.
Sensing object Cable length
Water, Fluorinert
TM
(Note 1, 2)
Agent, such as Sulfuric
acid, Hydrochloric acid,
Phosphoric acid or
Ammonia etc.
(Note 1, 3)
Simple wire-saving unit for leak detection sensor
6.562 ft or 3 m 9.843 ft) is also
EX-F70
SERIES
W1.024 × H0.748
in, so that it can
W0.787 × H3.150 × D2.047
Model No.
EX-F71
EX-F71-PN
2 m 6.562 ft
EX-F72
EX-F72-PN
EX-F61
EX-F61-PN
3 m 9.843 ft
EX-F62
EX-F62-PN
Appearance Model No.
EX-FC1
EX-F60
SERIES
26 mm 1.024 in 26 mm 1.024 in
9 mm 9 mm
19 mm 0.748 in 19 mm 0.748 in
0.354 in 0.354 in
in.
Output
NPN open-collector transistor
PNP open-collector transistor
NPN open-collector transistor
PNP open-collector transistor
NPN open-collector transistor
PNP open-collector transistor
NPN open-collector transistor
PNP open-collector transistor
Output
Relay contact 1 a
854
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Wafer
Detection
Liquid Leak
Detection
Liquid Level
Detection
Water
Detection
Color Mark
Detection
Hot Melt Glue
Detection
Ultrasonic
Small / Slim
Object Detection
Obstacle
Detection
Other
Products
SQ4
EX-F70/
EX-F60