Installation - GE 2-9751 User Manual

D
ESKTOP
I
NSTALLATION
1. Plug the telephone line cord into the base and into a modular jack.
2. Plug the power supply cord into the base, into an AC outlet.
3. Set the PULSE/TONE switch to TONE for touch-tone service, or PULSE
for rotary service. If you don't know which type of service you have,
check with the phone company.
4. Raise the base antenna.
5. Turn on the RINGER switch so the
handset rings for incoming calls.
6. Place handset in the base to charge
for 12 hours. The CHARGE/IN USE
light comes on indicating that the
battery is charging.
NOTE: Use only the Thomson
power supply that came with this
unit. (5-2412 for model 2-9752 or
5-2411 for models 2-9751 and
2-9753) Using other adapters may
damage the unit.
2
1
3
PULSE/TONE switch
PHONE CHANNEL
1 2 3
ABC DEF
4 5 6
JKL MNO
GHI
7 8 9
PRS TUV WXY
0 #
*
TONE OPER
MEMORY
RINGER switch
4
1
2
3
4
5
6
7
8
9
0
PHONE NO.
PAGE / FIND
CHARGE
IN USE
CHARGE/IN USE light
3