Recommended Sae Viscosity Number; Temperature Range For Sae Viscosity Numbers - Hyundai Santa Fe Owner's Manual

Specifications, Consumer information, Reporting safety defects
I040100AXM
Recommended SAE viscosity
number
CAUTION
Always be sure to clean the area
around any filler plug, drain plug, or
dipstick before checking or drain-
ing any lubricant. This is especially
important in dusty or sandy areas
and when the vehicle is used on
unpaved roads. Cleaning the plug
and dipstick areas will prevent dirt
and grit from entering the engine
and other mechanisms that could
be damaged.
8 6
Engine oil viscosity (thickness) has an
effect on fuel economy and cold weather
operating (engine start and engine oil
flowability). Lower viscosity engine oils
can provide better fuel economy and cold
weather performance, however, higher
viscosity engine oils are required for sat-
isfactory lubrication in hot weather. Using
oils of any viscosity other than those rec-
ommended could result in engine dam-
age.

Temperature Range for SAE Viscosity Numbers

°C -30
Temperature
-10
(°F)
Gasoline
Engine Oil * 1
* : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE
1
5W-20 (API SM / ILSAC GF-4). However, if the engine oil is not available in your country,
select the proper engine oil using the engine oil viscosity chart.
When choosing an oil, consider the range
of temperature your vehicle will be oper-
ated in before the next oil change.
Proceed to select the recommended oil
viscosity from the chart.
-20 -10 0 10 20
0 20 40 60
10W-30
5W-20, 5W-30
30 40 50
80 100 120