Seat Warmer - Hyundai Santa Fe Owner's Manual

Safety system of your vehicle
Removal
To remove the headrest, raise it as far as
it can go then press the release button (1)
while pulling upward (2).
To reinstall the headrest, put the head-
rest poles (3) into the holes while press-
ing the release button (1). Then adjust it
to the appropriate height.
WARNING
Make sure the headrest locks in
position after adjusting it to proper-
ly protect the occupants.
3 10
OCM030012
C010107AFD
Seat warmer (if equipped)
The seat warmer is provided to warm the
front seats during cold weather. With the
ignition switch in the ON position, push
either of the switches to warm the driver's
seat or the front passenger's seat.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
"OFF" position.
• Each time you push the button, the
temperature setting of the seat is
changed as follows :
OFF → HIGH (
• The seat warmer defaults to the OFF
position whenever the ignition switch is
turned on.
: HIGH
OCM029145N-2
) → LOW ( )
: LOW