Power Management Features; Power Mode; Power Management Commands - IBM IC25N020ATDA04 - Travelstar 20 GB Hard Drive Specifications

2.5 inch ata/ide hard disk drive
Hide thumbs Also See for IC25N020ATDA04 - Travelstar 20 GB Hard Drive:
Table of Contents

Advertisement

LBA addressing mode
Logical sectors on the device shall be linearly mapped with the first LBA addressed sector (sector 0)
being the same sector as the first logical CHS addressed sector ( cylinder 0, head 0, sector 1). Irre-
spective of the logical CHS translation mode currently in effect, the LBA address of a given logical sector
does not change. The following is always true:
LBA = ((cylinder*heads_per_cylinder+heads)*sectors_per_track)+sector-1
where heads_per_cylinder and sectors_per_track are the current translation mode values.
On LBA addressing mode the LBA value is set to the following register:
Device/Head
Cylinder High
Cylinder Low
Sector Number

11.5 Power management features

The power management feature set permits a host to modify the behavior in a manner which reduces the
power required to operate. The power management feature set provides a set of commands and a timer
that enables a device to implement low power consumption modes.
The drive implements the following set of functions.
1. A Standby timer
2. Idle command
3. Idle Immediate command
4. Sleep command
5. Standby command
6. Standby Immediate command

11.5.1 Power Mode

Sleep Mode
The lowest power consumption when the device is powered on occurs in Sleep Mode.
When in sleep mode, the device requires a reset to be activated.
Standby Mode
The device interface is capable of accepting commands, but as the media may not be
immediately accessible, there is a delay while waiting for the spindle to reach
operating speed.
Idle Mode
Refer to Section 11.6, "Adaptive Power Management (ABLE-3) feature" on page 85.
Active Mode
The device is in execution of a command or accessing the disk media with the read
look-ahead function or the write cache function.

11.5.2 Power management commands

The Check Power Mode command allows a host to determine if a device is currently in, going to, or
leaving standby mode.
<---- LBA bits 27-24
<---- LBA bits 23-16
<---- LBA bits 15- 8
<---- LBA bits
Travelstar 48GH, 30GN & 15GN hard disk drive specifications
7- 0
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents