Set Features Commands Support Coverage - Hitachi 7K100 - Travelstar - Hard Drive Specifications

Note 5. S.M.A.R.T. Function Set
Note 6. Security Mode Feature Set
Note 7. Removable

15.2 SET FEATURES Commands Support Coverage

The following table provides a list of Feature Registers, Feature Names, and implementation for the Travelstar
7K100. The third column indicates whether or not the Travelstar 7K100 has the capability of executing the
command in comparison to the ATA-6 defined command set. For detailed operation, refer to section "Set Features
(EFh)" on page 154.
Features
Features Name
Register
02h Enable write cache
03h Set transfer mode
05h Enable Advanced Power Management
Enable Power-Up in Standby feature set
06h
Power-Up in Standby feature set device spin-up
07h
09h Enable Address Offset mode
Enable Automatic Acoustic Management feature set
42h
44h Set vendor specific bytes ECC
55h Disable read look-ahead feature
5Dh Enable release interrupt
5Eh Enable SERVICE interrupt
66h Disable reverting to power on defaults Yes
82h Disable write cache
85h Disable Advanced Power Management
Disable Power-Up in Standby feature set
86h
89h Disable Address Offset mode
95h Enable Media Status Notification
AAh Enable read look-ahead feature
BBh Set 4 bytes ECC
Disable Automatic Acoustic Management
C2h
feature set
CCh Enable reverting to power on defaults
DDh Disable release interrupt
DEh Disable SERVICE interrupt
others Reserved
Travelstar 7K100 Hard Disk Drive Specification
201
Implementation for
Travelstar 7K100
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
No
Reserved