Light Bulb Replacement; Headlight Bulb Replacement - E-Z-GO 2Five Owner's Manual

MAINTENANCE PROCEDURES
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

LIGHT BULB REPLACEMENT

To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean,
dry tissue or paper towel to handle the glass portion of the bulb.

Headlight Bulb Replacement

Make sure that the vehicle key switch is in the OFF position and
the key has been removed. For vehicles equipped with lights
mounted in the cowl, locate the headlight bulb socket on the
backside of the light assembly.
1. Disconnect the accessory harness (5) from the light bulb.
2. Turn the headlight bulb (3) clockwise and pull to remove.
3. Align the bulb with the opening in the back of the headlight
assembly.
4. Turn the bulb (3) counterclockwise until it stops.
3
5. Connect the accessory harness (5) to the light bulb (3).
5
.
2Five Owner's Guide
81