Getting Started; Accessories; Cautions On Handling; Cautions On Installation - Denon DCD-CX3 Operating Instructions Manual

ENGLISH

Getting Started

Accessories

Check that the following parts are supplied with the product.
q Operating instructions ............................................................. 1
w Service station list ................................................................... 1
e Power supply cord (Cord length: Approx. 1.5 m) .................... 1
r Remote control unit (RC-1059) ................................................ 1
t Dry cell battery (R03/AAA) . ...................................................... 2
y Audio cord (Cable length: Approx. 1.0 m) ................................ 1
e r

Cautions on handling

• Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
• Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When traveling or leaving home for long
periods of time, be sure to unplug the power supply cord from the
power outlet.
• Sufficiently ventilate the place of installation
If the unit is left in a room full of the smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup could get dirty,
in which case it will not be able to read the signals properly.
• About condensation
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation (dew) may form on
the operating parts inside the unit, causing the unit not to operate
properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If so, move
the mobile phone away from this unit when it is in use.
• Moving the unit
First eject the disc, turn off the power, then unplug the power supply
cord from the power outlet.
Next, disconnect the connection cables to other system units before
moving the unit.
• Note that the illustrations in these instructions may differ from the
actual unit for explanation purposes.
NOTE:
• This product uses a semiconductor laser. To ensure stable
operation, it is recommended to use the product indoors at a
t y
temperature of 5 °C (41 °F) ~ 35 °C (95 °F).

Cautions on installation

Note:
For proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
b

About discs

Discs that can be played

q Super Audio CDs
Super Audio CDs marked with the logotypes indicated below can be
played on this unit.
b
b Note
b

ENGLISH
There are three types of Super Audio CDs:
q Single layer disc
Single layer Super Audio CD with only an HD layer.
w Dual layer disc
S uper Audio CD with a double HD layer, offering extended playing
time and high sound quality.
e Hybrid disc
Two-layer Super Audio CD with an HD layer and a CD layer.
The signals on the CD layer can be played on a regular CD player.
Types of Super Audio CDs
Single layer disc Dual layer disc
HD layer HD layer
b What is the HD layer?
The HD layer is a layer of high density signals for Super Audio CDs.
b What is the CD layer?
The CD layer is the layer of signals that can be read on a regular
CD player.
Wall
• This unit is not compatible with multi-channel playback.
w Music CDs
Discs marked with the logotype below can be played in this unit.
Discs with special shapes (heart-shaped discs, octagonal discs, etc.)
cannot be played. Do not attempt to play them, as doing so can
damage the product.
Hybrid disc
CD layer HD layer