Download Print this page

Cisco C4KX-PWR-750AC-R Installation Note

Catalyst 4500-x ac-input power supply.
Hide thumbs

Advertisement

Catalyst 4500-X AC-Input Power Supply
Installation Note
Revised: October 15, 2012
Product Numbers:
This document covers installing and removing the AC-input power supply in the Catalyst 4500-X series
switch chassis.
AC-input power supplies are not included as part of the basic chassis configuration product numbers.
Note
The AC-input power supplies are ordered separately.
Contents
This installation note contains the following sections
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
C4KX-PWR-750AC-F(=)
Safety, page 3
Power Cords, page 14
C4KX-PWR-750AC-R(=)
C4KX-PWR-BLANK(=)

Advertisement

   Related Manuals for Cisco C4KX-PWR-750AC-R

   Summary of Contents for Cisco C4KX-PWR-750AC-R

  • Page 1: Table Of Contents

    Power Supply Specifications, page 13 • Power Cords, page 14 • Related Documentation, page 19 • Obtaining Documentation and Submitting a Service Request, page 20 • Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA...

  • Page 2: Ac-input Power Supply Features

    There are two versions of the 750 W AC-input power supply, the C4KX-PWR-750AC-F power supply which has back-to-front airflow (the release lever is color-coded blue indicating cool side) and the C4KX-PWR-750AC-R power supply which has front-to-back airflow (the release lever is color-coded burgundy indicating warm side). Both power supplies provide 750 W of power.

  • Page 3: Safety

    Safety The AC power supply has two LEDS mounted on the lower left corner of the power supply front panel. (See Figure 1.) Together, the two LEDs provide the status of the power supply. Table 1 lists the meanings of the LEDs. Table 1 AC-Input Power Supply Status LEDs Meanings OK LED (Green)

  • Page 4

    Safety Statement 1071—Warning Definition Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.

  • Page 5

    Safety Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

  • Page 6

    Safety Varning! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

  • Page 7

    Safety Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.

  • Page 8

    Safety Catalyst 4500-X AC-Input Power Supply Installation Note OL-26535-01...

  • Page 9: Tools Required

    Tools Required Tools Required No specific tools are required to install or remove the AC-input power supply. Installing the Power Supply To install the AC-input power supply, follow these steps: Remove the power supply from the shipping packaging and discard the packaging. Step 1 Verify that the new power supply has the correct airflow direction (front-to-back or back-to-front) for Step 2...

  • Page 10

    Installing the Power Supply The chassis determines which airflow direction is correct by polling all of the fan assemblies and Note the power supplies. The airflow direction for all of the devices must be the same. If the airflow direction of the replacement power supply or the redundant power supply does not match the fan assemblies airflow direction, the system software shuts down the power supply and generates a power supply mismatch error message on the console.

  • Page 11: Removing The Power Supply

    Removing the Power Supply Figure 3 Installing the AC-Input Power Supply Verify that you have the correct source AC power cord for your installation. See the “Power Cords” Step 6 section on page 14 for a list, including descriptions and illustrations, of the AC power cords supported on the power supply.

  • Page 12

    Removing the Power Supply Grasp the power supply handle with your forefinger and place your thumb on the power supply release Step 3 handle. Step 4 Squeeze your forefinger and thumb together and pull on the power supply handle to release the power supply from the chassis bay.

  • Page 13: Power Supply Specifications

    Power Supply Specifications Power Supply Specifications Table 2 lists and describes the electrical specifications for the 750 W AC-input power supply. Table 2 Electrical Specifications, 750 W AC-Input Power Supply Specification Description AC-input type Autoranging input with power factor correction (PFC) AC-input voltage 100 to 240 VAC (115/230 VAC nominal)

  • Page 14: Power Cords

    Power Cords Table 3 lists the physical specifications of an AC-input power supply (C4KX-PWR-750AC-R= or C4KX-PWR-750AC-F=). Table 3 Dimensions and Weight for an AC-Input Power Supply Specification Description AC-input power supply 1.57 x 2.15 x 14.28 in dimensions (3.99 x 5.46 x 36.27 cm)

  • Page 15

    Power Cords Figure 5 CAB-9K10A-SW=, CAB-C15-ACS= (AC Power Cord, Switzerland) Cordset rating: 10 A, 250 V Length: 8 ft. 2 in (2.5 m) Plug: MP232-R Connector: IEC 60320 C15 Figure 6 CAB-AS3112-C15-AU= (AC Power Cord, Australia) Cordset rating: 10 A, 250 V Length: 8 ft 2 in.

  • Page 16

    Power Cords Figure 8 CAB-BS546-C15-SA= (AC Power Cord, South Africa, India) Cordset rating 10A, 250V 6 ft. 0 in (1.83 m) Plug: BS 546 Connector: IEC 60320 C15 (SABS 164-1) Figure 9 CAB-C2316-C15-IT= (AC Power Cord, Italy) Cordset rating: 10 A, 250 V Length: 8 ft 2 in.

  • Page 17

    Power Cords Figure 11 CAB-IR2073-C15-AR= (AC Power Cord, Argentina) Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: IRAM 2073 Connector: IEC 60320 C15 Figure 12 CAB-US515-C15-US= (AC Power Cord, North America) Cordset rating 13A, 125V (8.2 feet) (2.5m) Plug: Connector:...

  • Page 18

    Power Cords Figure 14 CAB-C15-JPN= (AC Power Cord, Japan) Cordset rating:12 A, 125 V Plug: JIS C8303 Length: 8 ft 2 in. (2.5 m) Connector: IEC 60320 C15 Figure 15 CAB-EL223-C15-BR= (AC Power Cord, Brazil) Cordset rating: 10 A, 250 V Length: 8 ft 2 in.

  • Page 19: Related Documentation

    Catalyst 4500-X switch chassis. Also includes Series Switch language translations of the warnings that appear in the other Catalyst 4500-X documentation. Catalyst 4500 Series Switch Cisco IOS Contains instructions on how to configure the Software Configuration Guide, Release Catalyst 4500-X switch.

  • Page 20: Obtaining Documentation And Submitting A Service Request

    Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.

This manual also for:

C4kx-pwr-blank, C4kx-pwr-750ac-f

Comments to this Manuals

Symbols: 0
Latest comments: