Switching The S-Video Output; Adjusting The Osd (On-Screen Display) - Pioneer DV-636D Operating Instructions Manual

Switching the S-Video Output

Expert
You can Switch the kind of S-Video signal output from
the S-Video outputs. If you connected your TV with an S-
Video cord, in rare cases the TV picture may appear
stretched. In this case switch the output from [S2] to
[S1].
Make changes in the [S-Video Out] in the Setup screen
Video menu in the [Expert] menu mode (page 30).
Audio1 Audio2 Video
TV Screen –
Video Out –
S-Video Out
Still Picture –
On Screen Display
Angle Indicator –
Move
Settings: S1
S2*
Adjusting the OSD (On-Screen
Display)
If you have already completed the Setup Navigator
screen operations, the settings on this page have
already been set by the player.
Setting the on-screen display
(OSD) language
This setting is used to establish the language that
operation indicators and on-screen messages and
operations display. Change this setting in the Setup
screen Language menu [OSD Language] setting.
Audio1 Audio2 Video
OSD Language English
Audio Language - English
Subtitle Language - Japanese
Auto Language - Japanese
Select On Screen Language
Move
Settings: English*
français
Deutsch
Italiano
Español
Notes
• The languages that can be selected may be different from
those shown above.
• The [OSD Language] setting is factory set to [English]. If
you want English to be displayed, it is not necessary to
adjust this setting.
Language General
16:9(Wide)
Video
S1
S2
Position-Normal
–
On
Exit
SETUP
* Factory setting
Language General
English
français
Deutsch
Italiano
Español
SETUP Exit
* Factory setting
Setting the position of the
on-screen display
When watching conventional software on a wide screen
TV, the operation display is at the very top of the screen,
and may be difficult to see. Changing the position of the
display lets you see operation indicators clearly even on
a wide screen TV.
Alternatively, you can choose to turn them off
completely with the [Off] setting.
Make changes in the [On Screen Display] in the Setup
screen Video menu in the [Expert] menu mode (page
30).
Audio1 Audio2 Video Language
TV Screen –
Video Out –
S-Video Out – S2
Still Picture –
On Screen Display
Angle Indicator –
Move
Settings: Position-Wide
Position-Normal*
Off
Note
This setting is only effective with DVDs that contain a 4:3
aspect ratio video presentation.
Expert
General
16:9(Wide)
Video
Field
Position-Wide
Position-Normal
Off
Exit
SETUP
* Factory setting
35
En