Setting The Video Output Format For The Av Connector (Rgb)-Tv; Switching The S-Video Output; Selecting The Type Of Paused Image To Display; Setting The Position Of The On-Screen Display - Pioneer DV-444-K Operating Instructions Manual

Setting the Video Output Format for
the AV CONNECTOR (RGB)-TV
When connections are made to the AV CONNECTOR
(RGB)-TV jack on the player via a SCART cable, it is
possible to select the video format that is compatible
with your TV or monitor. Select [Video] to have a
composite video signal output, [S-Video] to have an S-
video signal output, and [RGB] to have an RGB signal
output. For more information on which format is most
appropriate, refer to the instructions supplied with your
TV or monitor.
Make changes to the [Video Out] setting in the Setup
screen Video 1 menu.
Audio1
A2
Set AV CONNECTOR video format
Move
Settings: Video*
S-Video
RGB

Switching the S-Video Output

Expert
– DVD
You can Switch the kind of S-Video signal output from
the S-Video outputs. If you connected your TV with an
S-Video cord, in rare cases the TV picture may appear
stretched. In this case switch the output from [S2] to
[S1].
Make changes in the [S-Video Out] in the Setup
screen Video 1 menu in the [Expert] menu mode (page
23).
Audio1
A2
Settings: S1
S2*
28
En
Language General
Video1 V2
TV Screen — 16:9(Wide)
Video Out — Video
S-Video
RGB
Exit
SETUP
* Factory setting
Language General
Video1 V2
TV Screen — 16:9(Wide)
Video Out — Video
S-Video Out — S1
Screen Saver S2
Move Exit
SETUP
*Factory Setting
Selecting the Type of Paused
Image to Display
This function lets you view a clear still-image when
DVD playback is paused.
Make changes in the [Still Picture] setting in the Setup
screen Video 2 menu in the [Expert] menu mode (page
23).
A2
Audio1 V1 Video2
Background
Video Adjust
Still Picture
On Screen Display
Angle Indicator
Move
Settings: Field
(Picture shake will be eliminated during a
paused picture.)
Frame
(Select to obtain higher picture quality.)
Auto*
(Selects [Field] or [Frame] automatically
according to the disc.)
Setting the Position of the
On-screen Display
When watching conventional software on a wide
screen TV, the operation display is at the very top of the
screen, and may be difficult to see. Changing the
position of the display lets you see operation indicators
clearly even on a wide screen TV.
Alternatively, you can choose to turn them off
completely with the [Off] setting.
Make changes in the [On Screen Display] in the Setup
screen Video 2 menu in the [Expert] menu mode (page
23).
Audio1 A2 V1 Video2
Background
Video Adjust
Still Picture
On Screen Display
Angle Indicator
Move
Settings: Position-Wide
Position-Normal*
Off
Note
This setting is only effective with DVDs that contain a 4:3
aspect ratio video presentation.
Expert
Language General
— Pioneer Logo
— t
— Field
Frame
Auto
Exit
SETUP
*Factory setting
Expert
Language General
— Pioneer Logo
— Auto
— Position-Wide
Position-Normal
Off
SETUP Exit
* Factory setting