Table of Contents
Advertisement
7.
Troubleshooting
Trouble
No sound or incomplete
audio
No power
Malfunction
DVD/VCD/CD
Trouble
No playback
No sound or incomplete
audio
No scan or skip possible
18
Action
Check if the random equipment are switched on and set
correctly.
Check cables for connection problems.
Check if the correct source is selected.
Check volume or mute setting.
Check if the power cord has been properly connected to
the power outlet.
Check if the master power switch on the side panel is ON.
Should the unit develop a serious malfunction, unplug
the unit for 30 minutes. After this, power on the unit and
restore to factory default.
Action
There is no disc inserted. Load a disc in the master unit.
Disc is loaded upside down. Place the disc with the label
facing upward.
Rating level of the disc is higher than the rating level
setting of the unit.
Invalid region code.
Incorrect type of disc.
Disc may be damaged or dirty, clean the disc or try
another disc.
Moisture may have condensed inside the unit. Remove
the disc and leave the unit powered on for one or two
hours.
Select another audio track.
During SCAN, SLOW MOTION or SINGLE STEP the
sound is muted.
Check if the disc is in fast forward or fast rewind mode.
Press the PLAY/PAUSE button (43).
Some discs are programmed to refuse user action at
certain sections. This is no malfunction. Single chapter
or track discs do not allow skip function.
Advertisement
Table of Contents
