Table of Contents
Advertisement
OPERATION
PLAYING DISCS
1.
If necessary, turn the unit ON with the Power Switch. The unit's Power LED should be
GREEN, indicating that the battery is not in need of a charge. The unit will attempt to
load a disc if one is present under the disc cover. Press the PUSH TO OPEN button
(item 11 on page 6), on the left side of the front panel to open the DVD door and put a
disc on the loader, with the label side facing up. For double-sided DVD discs, mount
the disc with the "A1" label (the Side 1 equivalent label) facing up.
2. ClosetheDVDdoor,andthediscwillbeloadedautomatically.Onceloaded,
if it is a DVD disc, it will start playing automatically, typically showing either the
Menu/Title Page on the screen or previews of coming attractions.
if it is a CD, it will play the first track directly.
PRE-STOP [ ]
3.
Press the STOP button (item 7 on page 6 / item 18 on page 7) once if you want invoke the
PRE-STOP mode. PRE-STOP stops the playback, displays the manufacturer's logo, and
allows playback to be resumed from the point at which STOP was pressed--simply by
pressing the ENTER button (item 9 on page 6 / item 4 on page 7). PRE-STOP is
very similar to PAUSE, except that PAUSE freezes the existing video on the screen, while
4.
PRE-STOP replaces it with the aforementioned logo.
Pressing the STOP button twice completely stops the disc, and causes the unit to enter the
STOP mode, where the disc ceases to spin, and playback can no longer be resumed from
the point at which the STOP button was pressed.
(PAUSE) STEP [ ]
5. The PAUSE function is applicable to both DVDs and CD audio discs:
a.
The PAUSE function (II) isinitiated by pressing the PAUSE button (item 7 on page 6
/ item 17 on page 7).
b.
For DVDs, pressing PAUSE causes the picture to freeze and the sound to cease.
c.
For CD audio discs, pressing PAUSE causes the sound to pause and bemuted.
d.
Press the PLAY/ENTER button again to resume normal play.
6.
The STEP function (available only on the remote control (item 17 on page 7) is
activated only after PAUSE is invoked.
a.
Each press of this key advances the video content by a small interval. The audio is
silent.
b.
Cancel the PAUSE or STEP function by pressing PLAY.
DVD SETUP MODE
Setup Mode provides the menus for the configuration of the SYSTEM SETUP,
7.
LANGUAGE SETUP, VIDEO SETUP, and SPEAKER SETUP categories.
a.
Press the SETUP button (item 4 on page 6 / item 6 on page 7) to display the Setup
Menu.
b.
Along the top of the initial display are four icons, each representing one of the four
categories listed above. By using the left [
on page 6 / item 5 on page 7) , it is possible to highlight the desired category,
whose name will also be displayed in yellow type below the icons.
c.
The following section will cover all four configuration categories and their settings.
] or right [
] direction keys ( item 8
GB-9
Advertisement
Table of Contents
