Care And Cleaning; Control Knobs - GE JP930 Owner's Manual

Care and cleaning of the cooktop.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
Molded rib
Stem
Spring
clip
Clear groove
How to Remove Packaging Tape
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape,
cooktop labels on the new appliances
is an application of a household liquid
dishwashing detergent, mineral oil or
cooking oil.

Control Knobs

The control knobs may be removed for easier
cleaning.
Before removing the knobs for cleaning,
please note that the knobs are in the
OFF position. When replacing the knobs,
check the OFF position to ensure proper
placement.
www.GEAppliances.com
Apply with a soft cloth and allow to soak.
Wipe dry and then apply an appliance
polish to thoroughly clean and protect
the surface.
NOTE: The adhesive must be removed from all
parts. It cannot be removed if it is baked on.
Wash knobs in soap and water but do not
soak. Avoid getting water down into the
knob stem holes.
The stem has a groove in each side. The
groove on one side has a spring clip. The
other groove is clear. Check the inside of
the knob and find the molded rib.
Replace the knob by fitting the molded
rib inside the knob into the clear groove
on the stem.
9