Sanyo Xacti VPC-S4 Instruction Manual page 35

Capturing sequential shots
1
Set the camera to the sequential shots shooting mode (see page 29).
2
Press the shutter release button to capture the sequential shots.
h Images are captured as long as the shutter release button is pressed.
h A maximum of four images are captured.
h During shooting,
3
Finish capturing images.
h Release the shutter release button to end recording.
NOTE
About the focus during sequential shots shooting
i In sequential shots shooting, the autofocus function is activated when the
shutter release button is pressed halfway and remains fixed at the same
focus until the sequential shots are finished.
appears in the LCD monitor.
32
English