Install The Batteries And Card - Sanyo Xacti VPC-S4 Instruction Manual

INSTALL THE BATTERIES AND CARD

Install the batteries
Make sure that the batteries' polarities ((+) and (–)) are correct.
1
Open battery compartment cover
on the camera bottom.
3
Close the battery compartment
cover.
CAUTION
Manganese batteries cannot be used
i Not only do manganese batteries have a short battery life, but there is the
danger of their overheating and causing damage to the digital camera.
Other batteries
i If you wish to use batteries other than the alkaline
batteries (LR6), we recommend the following.
h AA-size nickel metal hydride (NiMH) batteries
(SANYO HR-3UB) × 2
h AA-size Ni-Cd batteries (SANYO N-3UV) × 2
h Lithium battery (CR-V3) × 1
When installing the batteries, make sure that they are
oriented correctly.
Do not open the battery compartment cover when the camera is turned
on.
i If the battery compartment cover is opened while the power is on,
important data may be lost. Sanyo Electric shall not be held responsible for
any losses that result from failure to comply with this warning.
21
English
2
Insert the batteries.
i To remove the batteries...
2 Pull out
1 Open
CR-V3