Sanyo Xacti VPC-S4 Instruction Manual page 31

While the image data is being recorded...
i The accessing indicator flashes while an image is being recorded and it is
not possible to take another picture at this time. When the accessing
indicator stops flashing, the camera is again enabled for shooting.
View the image just captured (preview display)
i Immediately after capturing an image,
you can press the SET button to preview
the image. Press the [l] or [m] arrow
button to view the previous image or the
next image. For video clips, press the
SET button to begin playback, and press
the [n] arrow button to pause playback.
Also, when playback is paused, you can
press the [l] or [m] arrow button for fast
forward play or fast reverse play. If you
do not want to keep the image, you can
press the [n] button at this time to delete the currently displayed image
from the camera's memory. To return to the shooting mode, press the [o]
arrow button.
PREVIEW
ONE ERASE
EXIT
English
28