GE ELECTRONIC TOUCH CONTROL PP950 Owner's Manual page 8

Usingthe surface elements.
Fsult Code ("F"and a number ib the disp/a/)
If an error occurs in the control
operation, a fhult code will flash "F"
with a ntm_ber in the display and the
control will produce an audible sound.
To correct:
[] Touch the
CONTROL LOCKpad
to
reset the
conti'ol.
_] Attempt to set the control to the
desired cooking setting.
[] If the timlt code is not cleared, allow
the cooktop to cool completely:
[_] J_dier cooling, touch the CONTROL
LOCKpad again to reset the control.
Again atteml)t to set the control to
the desired cooking setting.
[] If the tault code is still not cleared,
turn off the cooktop power at the
circuit breaker or fllse box for one
minute.
[] If the fimlt code reappears, call fi)r
serxice.