Connectors; I/O Terminal Connector - Axis M3026–VE User Manual

AXIS M3026–VE Fixed Dome Network Camera
Technical Specifications
Item
Function/group
Dimensions
(Diameter x
Height)
Weight
Included
accessories
Optional
accessories
Video
management
software

Connectors

I/O terminal connector

4–pin terminal block for:
• Digital Input
• Digital Output
• Auxiliary power and ground (GND)
Function
GND
12V DC Power
Digital Input
Digital Output
Specifications
92 mm x 132 mm (3.6 x 5.1 in)
740 g (1.6 lb.)
Drill hole template, Installation Guide, Installation and Management Software CD,
Windows decoder 1-user license, Resitorx L-key, terminal block connector
For indoor use:
AXIS T94F01D Pendant Kit with Network Cable Coupler Indoor
AXIS T94F01L Recessed Mount Kit with Network Cable Coupler Indoor
For outdoor use:
Network Cable Coupler IP66 (fits inside AXIS T94F02D Pendant Kit)
AXIS T94F02D Pendant Kit with sunshield
For indoor or outdoor use:
AXIS T94F01M J-Box/Gang Box Plate and Network Cable Coupler Indoor (coupler must be
placed in waterproof area)
AXIS Camera Companion (included), AXIS Camera Station and video management
software from Axis' Application Development Partners (not included). See
www.axis.com/products/video/software
Pin Notes
1
Ground
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3
Connect to GND to activate, or leave floating (unconnected)
to deactivate.
4
Internal connection to ground when activated, floating
(unconnected) when deactivated. If used with an inductive
load, e.g. a relay, a diode must be connected in parallel with
the load, for protection against voltage transients.
60
Specifications
Max load = 15 mA
0 to +30 V DC
Max load =100 mA
Max voltage = +30 V DC