TP-Link TL-ER5120 User Manual page 61

The following items are displayed on this screen:
General
Disable Bandwidth
Control:
Enable Bandwidth
Control all the time:
Enable Bandwidth
Control When:
Default Limit
Limited Bandwidth:
Figure 3-36 Configuration
Select this option to disable Bandwidth Control.
Select this option to enable Bandwidth Control all the time.
With this option selected, the Bandwidth Control will take effect when the
bandwidth usage reaches the specified value.
Default Limit applies only for users that are not constrained by Bandwidth
Control Rules. These users share certain bandwidth with upper limit
configured here. Value 0 means all the remained bandwidth is available to
use.
-55-