Canon Ij Network Tool Menus - Canon MG5200 series Manual

Advanced Guide >
About Network Communication
Menus
N012

Canon IJ Network Tool Menus

This section describes the menus in the Canon IJ Network Tool dialog box.
1.
File menu
Exit
Exits the Canon IJ Network Tool.
2.
View menu
Status
Displays the Status dialog box to confirm the printer connection status and wireless communication
status.
Refresh
Updates and displays the contents of Printers to the latest information.
Important
To change the printer's network settings using the Canon IJ Network Tool, it must be
connected via a LAN.
If No Driver is displayed for the name, associate the port with the printer.
If Not Found is displayed for the status, check the followings:
The access point is turned on.
When using wired LAN, the LAN cable is connected properly.
If the printer on a network is not detected, make sure that the printer is turned on, then select
Refresh. It may take several minutes to detect printers. If the printer is not yet detected, connect
the machine and the computer with a USB cable, then select Refresh.
If the printer is being used from another computer, a dialog box is displayed informing you of
this condition.
Note
This item has the same function as Update in the Canon IJ Network Tool dialog box.
Network Information
Displays the Network Information dialog box to confirm the network settings of the printer and the
computer.
Display Warning Automatically
>
Changing and Confirming Network Settings
> Canon IJ Network Tool