Lan Settings - Canon MG5200 series Manual

Advanced Guide > Changing the Machine Settings
U076

LAN settings

WLAN active/inactive
Activates/deactivates wireless LAN.
Wireless LAN setup
Selects the setting method for wireless LAN connection.
Note
You can enter this setting menu by following the procedure below:
1. Select Setup on the HOME screen.
2. Select Wireless LAN setup.
In this case, activate wireless LAN.
Easy setup
Select when you perform settings for wireless LAN manually using the Operation Panel of the
machine.
Note
If you perform settings for wireless LAN from the computer, refer to your setup manual.
Other setup
Select WPS, WCN, or Advanced setup. If you select WPS, select Push button method or PIN
code method according to the method your access point supports, then follow the on-screen
instructions. If you select WCN, you need a USB flash drive on which settings for wireless LAN
are saved. If you select Advanced setup, follow the on-screen instructions.
Confirm LAN settings
The list of wireless LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.
WLAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Connection
SSID
Communication
mode
Channel
Wireless LAN
security
IP address
Subnet mask
Subnet prefix
length
Default gateway
> Changing the Machine Settings on the LCD
Setting (IPv4)
Active/Inactive
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Infrastructure
XX
Inactive/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
-
XXX. XXX. XXX. XXX
> LAN settings
Setting (IPv6)
Active/Inactive
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Infrastructure
XX
Inactive/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX
-
XXX
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX