Canon MG5200 series Manual page 1011

Advanced Guide >
About Network Communication
a Computer Connected to the Network
N045
Cannot Print, Scan, or Access the Card Slot from a Computer
Connected to the Network
Check 1: Make sure that the network settings of the computer are
correct.
For the procedures to set up the computer, refer to the manual of your computer or contact its
manufacturer.
Check 2: If the MP Drivers is not installed, install the MP Drivers.
Insert the Setup CD-ROM into the computer's disc drive and perform Custom Install and select MP
Drivers to install again.
Check 3: When using wireless LAN, make sure that access control is
not set to the access point.
For the procedures to connect an access point and set it up, refer to the manual of your access point
or contact its manufacturer.
Note
To check the MAC address or the IP address of the computer, see
the MAC Address of the Computer
>
Troubleshooting > Cannot Print, Scan, or Access the Card Slot from
.
Checking the IP Address or
Page top