Canon MG5200 series Manual page 1028

Advanced Guide >
About Network Communication
N003
Initial Values Set at Factory (Network)
Item
Enable/disable LAN
SSID
Communication mode
Wireless Security
IP address
Printer name setting*
IPv4/IPv6 setting
Set memory card sharing
Enable/disable WSD (WSD settings)
Timeout setting (WSD settings)
LLTD setting
Enable/disable Bonjour (Bonjour settings)
Service name (Bonjour settings)*
LPR service advertising (Bonjour settings)
LPR protocol setting
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
* The initial value in this item varies by machine. You can check the value in this item using the Operation
Panel on the machine.
Changing the Machine Settings on the LCD
> Appendix
> Initial Values Set at Factory (Network)
Disable LAN
BJNPSETUP
Infrastructure
Disable
Getting automatically
XXXXXXXXXXXXXXX
IPv4
Enable
Enable
1 minute
Enable
Enable
Canon MGXXXX series _XXXXXXXXXXXX
OFF
Enable
Initial Values
Page top