Scan Key - AOR AR-Mini Operating Manual

INTRODUCTION
Display
(Up) key
●
Press this key to increase the setting
value.
●
Hold down this key to set the
attenuator.
●
Press this key while holding down the
FUNC key to set the VFO, Broadcast
Facility or PRESET.
●
Hold down this key together with the
FUNC key to store a priority channel
for PRIORITY SCAN.
(Down) key
●
Press this key to decrease the setting
value.
●
Hold down this key to start the 2VFO
watch.
●
Press this key while holding down the
FUNC key to start the Priority Scan.
●
Hold down this key together with the
FUNC key to store a channel for the
2VFO watch.
PWR key
●
Press and hold this key to turn the
power on or off.
External DC jack
●
Remove the external DC jack cover
and insert the DC output plug of an
AA-mini or DC mini for power supply
or charging.
10
MODE key
●
Press this key to switch between FM,
Wide FM, AM and auto modes.
●
Press this key while holding down the
FUNC key to select a tone type.

SCAN key

●
Press this key to start a search in
VFO, or to begin a scan in MEMORY.
●
Hold down this key to search for a
bug frequency.
●
Press this key while holding down the
FUNC key to store frequencies in the
limit search operation.
●
Hold down this key together with the
FUNC key to change the band in the
limit search operation.
V/M key
●
Press this key to switch between VFO
and MEMORY.
●
Hold down this key to assign a skip
channel for search or scan.
●
Press this key while holding down the
FUNC key to memorize a frequency
and then name the memorised
frequency.
●
Hold down this key together with
the FUNC key to erase a memory
channel.