Related Manuals for Bush BCR26DABIP
Summary of Contents for Bush BCR26DABIP
- Page 1 DAB+ Clock Radio with Universal Dock for iPhone The Gold Technical Support Line: 1902 215 259 Personal Product Support (Charges will apply at $2.95 per minute) BCR26DABIP www.bushaustralia.com.au...
- Page 2 BCR26DABIP Introduction Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit’s many features and to ensure you get the very best from your purchase.
- Page 3 BCR26DABIP Safety Instructions Ensure that you read all of the safety instructions before using this unit. Safety Considerations Position the power cable and other connected cables so that they are not likely to be walked on, pinched or where items can be placed on or against them.
-
Page 4: Table Of Contents
BCR26DABIP Contents Location Controls Preparation For Use Using for Main Operation Using for DAB+ Operation 8-13 Using for FM Operation 14-15 Using for Docking iPod/iPhone Using the Auxiliary System Setting Factory Reset Backlight Dimmer Snooze Function Sleep Function Alarm Time Setting... -
Page 5: Location Controls
BCR26DABIP Location Controls Buttons Button Buttons... -
Page 6: Preparation For Use
BCR26DABIP Preparation For Use Power Source This unit is supplied with an AC adaptor; follow these steps to connect the Power Source. 1. Unwind the power cord of the AC adaptor to its full length. 2. Connect the small end of the AC adaptor to the DC socket on the left side of the unit. -
Page 7: Using For Main Operation
BCR26DABIP Using for Main Operation Switching On Press the STANDBY button to power on the unit. Press the STANDBY button again to switch to standby mode. Adjusting the Volume 1. To increase the volume, press the VOLUME+ button 2. To decrease the volume, press the VOLUME- button... -
Page 8: Using For Dab+ Operation
BCR26DABIP Using for DAB+ Operation Listening to DAB+ Radio Press the STANDBY button to turn the unit on. The following screen will be displayed. A bar graph indicating the progress of the DAB+ station search. The number of stations found increases as the scan progresses. - Page 9 BCR26DABIP Using for DAB+ Operation Storing DAB+ Presets You can preset up to 10 DAB+ stations for easy access as follows: Press the SKIP UP/DOWN buttons to scroll through the stations in the station list. Press the SELECT button to confirm to the station you wish to preset.
- Page 10 BCR26DABIP Using for DAB+ Operation Changing the DAB+ Station Information It is possible to change the information displayed on the second line of the display when listening to a DAB+ station. There are seven types of information available as listed below with examples to the right.
- Page 11 BCR26DABIP Using for DAB+ Operation Using the MENU Control (DAB+ mode) The MENU control allows you to change some of the system options on your unit. These options are arranged in a menu structure as shown below.
- Page 12 BCR26DABIP Using for DAB+ Operation Using the Menu Press the MENU button to enter the menu. Press the SKIP Up/Down buttons to scroll through the options described below. Full Scan 1. Press the MENU button to access the menu. 2. Press the SKIP UP/DOWN buttons until “Full scan” is displayed.
- Page 13 BCR26DABIP Using for DAB+ Operation Dynamic Range Control (DRC) DRC adds or removes a degree of compression to compensate for the differences in the dynamic range between radio stations. For example, a station broadcasting popular music may have a high level of compression applied since the emphasis is on a constant high listening level.
-
Page 14: Using For Fm Operation
BCR26DABIP Using for FM Operation Using the FM Radio 1) Press the STANDBY button to switch the Clock Radio on 2) Press the MODE button to select FM mode. DON'T FORGET! You may hear background noise as no station has been tuned in. The display will show the frequency of the FM station. - Page 15 BCR26DABIP Using for FM Operation Changing the FM Station Information It is possible to change the information that is displayed on the second line of the display when listening to an FM station. There are four types of information available as listed below with examples to the right.
-
Page 16: Using For Docking Ipod/Iphone
BCR26DABIP Using For Docking iPod/iPhone Docking the iPod or iPhone 1) Press the STANDBY button to switch the Clock Radio on. 2) Press the Mode button to select iPod mode. This system is equipped with a universal dock to allow you to connect your iPod or iPhone. -
Page 17: Using The Auxiliary
BCR26DABIP Using the Auxiliary AUX In Connection Connect a 3.5mm stereo audio lead (not included) to the AUX-IN socket on the unit and the other end to an auxiliary device such as an MP3 player. Press the STANDBY button to turn on the unit. -
Page 18: System Setting
BCR26DABIP System Setting Using the MENU Control (STANDBYmode) The MENU control allows you to change some of the system options on your unit. These options are arranged in a menu structure as shown below. In DAB+ mode, the time and date is set automatically and is always accurate. -
Page 19: Factory Reset
BCR26DABIP Factory Reset This setting will restore the factory default settings of the unit. In STANDBY mode, press the MENU button once. Use the SKIP UP/DOWN buttons to select RESET. Press the SELECT button to confirm. Use the SKIP UP/DOWN buttons to select “Yes / NO” and press the SELECT button to confirm. -
Page 20: Alarm Time Setting
BCR26DABIP Alarm Time Setting Setting the Alarm There are 2 alarms available which allow you to wake to DAB/ FM / iPod or iPhone / BUZZER mode. Press the STANDBY button to turn the unit to standby mode. Press the ALARMS button to select alarm1 or alarm2 setting mode. -
Page 21: Troubleshooting
BCR26DABIP Troubleshooting PROBLEM POSSIBLE CAUSE REMEDY No sound Volume not adjusted. Adjust the volume. Mains adaptor is not Connect the mains correctly connected. adaptor properly. The unit does react to Microprocessor locked up. Turn off the unit, operation of any button... -
Page 22: Warranty
In the unlikely event that your product fails to work normally, please contact the Bush Warranty on 1800 509 394 (Australia) or 0800 450 259 (New Zealand) and have your receipt of purchase on hand. This warranty is subject to the following provisions: •... - Page 23 PO BOX 6287 Silverwater NSW 1811 www.bushaustralia.com.au...