Wiring Connection - Boss Audio Systems RDS740UA User Manual

Mp3 compatible in-dash cd receiver with front panel aux input and usb port

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

8. To tune for a station with the traffic announce ment

A) When press the button, it is activated as TA mode on or off.

When TA mode is on(TA is displayed on LCD), it will begin to seek TA station and

TA SEEK will be displayed on LCD for a while.

When traffic announcement is transmitted:

1) If the unit is in disc mode, it will switch to radio mode temporarily.

2) Temporarily switch over to an EON linked station when EON detects a traffic

announcement on that other program, and TP will be displayed on LCD.

3) If volume level is below 20, volume level is raised to 20, and returns to its previous

mode and volume level when the traffic announcement is over. If volume is adjusted

during traffic announcement, only the traffic announcement volume is valid.

TA interruption function:

The current traffic announcement is cancelled by pressing this key. But the TA mode

will not be off.

When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved

only when traffic program identification code has been received.

When TA is ON, traffic program identification code is not received during specified

time.

B) When pressed and held, EON TA LOCAL/ EON TA DISTANCE mode is selected.

The purpose of this mode is to reduce unwanted interference caused by EON TA

switching due to weak signal strength, resulting in the radio being switched back to

the current tuned station, or being muted.

1) EONTA LOCAL mode:

When the field strength level of EON linked stations is below the threshold level,

the radio will not switch to that station, avoiding unnecessary interference.

When EONTA LOCAL mode is selected, EONTA LO on numeric display is indicated

for a few seconds.

2) EONTA DISTANCE mode:

EON TA switching will be determined by the information of the current station. When

EONTA DISTANCE mode is selected, EONTA DX on numeric display is indicated for

a few seconds.

USB or DISC OPERATION:

1. To load/unload disc

Press the REL button to flip down the front panel and then insert the disc into the disc

compartment or press the EJ button to eject the disc from the disc compartment.

2. To load/unload USB storage

Insert the USB storage into USB socket, then the playing mode will be changed into

USB mode and display USB on LCD, and then play the first track of USB.

NOTE: Always remember to switch off the unit's power or switch to other mode then

remove out the USB Stick. Never try removing the USB Stick while playing music file

on the USB stick. It may damage the USB stick and sometimes will cause the unit

system lock up.